| Station 1 : |
- Travel U-axis (bar feeder)a |
| Station 2 : |
- 3 sliders X, Y, Z
- 2 spindles Ø 55 mm
|
Spindles speed : 12'000 rpm
Collets : ESX 25
|
| Station 3 : |
- 3 sliders X, Y, Z
- Swivelling spindle U-axis
:
- 2 spindles Ø
55 mm
|
Angle : 0° to +50°
Spindles speed : 12'000 rpm
Collets : ESX 25
|
| Station 4 : |
- 3 sliders X, Y, Z
- 2 spindles Ø
35 mm
|
Spindles speed : 12'000 rpm
Collets : ESX 16
|
| Station 5 : |
- 3-axes cutting off unit
- C-axis back device
- 1 cutting off spindle :
|
Spindle speed : 6'000 rpm
Collet : ESX 25
|
| Station 6 : |
- 3-axes back machining device for the machinig of the
back face of the part after cut-off operation
- 3 spindles Ø
35 mm
|
Spindles speed : 12'000 rpm
Collets : ESX 16
|
| Numerical rotary transfer plate |
| Hydraulic tightenings : |
- Pressure : 0 to 250 bar |
| Coolant unit : |
- Tank capacity
:
- Coolant flowrate :
- Filtration with unrolling paper band
|
100 liters
22 l/min
|
| Double cockpit |
| Numeric control : |
- PC and PMAC card |
ISO-programming |
| Brushless motors |
| Electronic cranksa |
| Connections : |
- Tension :
- Installed power :
- Current of connection :
- Pneumatic pressure :
|
3 x 400 V / 50 Hz
12,5 kVA
20 A
6 bar
|
| Dimensions : |
- L = 190 cm
- W = 580 cm
- H = 260 cm
|
a |
| Weight : |
- 4'500 kga |
| Options : |
- Additional spindles
- Block of transversal spindlesl
- Rigid tapping
- Vacuum cleaner for the oil vapors
- Refrigeration of the coolant
- Post-processor
- Remote maintenance
|
